VIBROPRESSES SERIES "S"
click on the image to enlarge

This is the top of the range system, designed to offer maximum productivity with minimum use of staff. The variable capacity high-powered hydraulic system, the electronic force and combined frequency vibrations, the automatic configuration functions and advanced diagnostics using a centralised graphic computer, place this product in a position from which it can compete with the best products on the international market.The high-performance, four-closure cubing system and the automatic cart which serves the “wireless” controlled drying cells enable outstanding production results with little waste and few stoppages in production.

The typical running cycle of an automatic plant of this type operates according to the following phase sequence:
the vibropress moulds the products on a table
the table is transferred to the lift
once the lift has been loaded, the automatic cart transfers the products into the drying cells where they are dried and then transferred to the lowering device
the tables are sent from the lowering device to the gripper for cubing of the finished products on pallets, which are bound and stored
the empty table is returned by the gripper to the production cycle and tipped for insertion into the vibropress.
UNIMATIC 1050 SERIES S TECHNICAL DATA
Working surface
1050X550 mm.
Products thickness
40/330 mm.
Net weight
22.500 Kg
Size of wooden boards used in production
1200X600X45 mm.
UNIMATIC 1010 SERIES N TECHNICAL DATA
Working surface
1050X1050 mm.
Products thickness
40/330 mm.
Net weight
23.000 Kg
Size of wooden boards used in production
1200X1100X45 mm.
MAIN FEATURES
    Centralised control with PLC
    Integral counter mould giude
    Quick mould setting system
    Variable vibration system
OPTIONAL
Automatic setting of machine parameters
Computer control system
Form Impianti v. Lombardia 12 53036 Poggibonsi SI ITALY tel +39 0577 937573 info@formimpianti.com