Automatic transfer skip

PLANTS

MACHINES

PRODUCTS

The automatic transfer skip consists of two groups (Master and Lem) electrically controlled from the centralised control panel. It is installed to serve automatic plants for the transfer of fresh/dry products inside the curing cells.

Depending on the configuration of the production plant, the automatic transfer skip can be freely configurable in terms of the number of layers and corresponding capacity; moreover, the Lem skip can carry out a 180-degree rotation in case of special needs.

The automatic transfer skip is equipped with a control panel with installed a Siemens PLC with S7 programming logic. A programmable keyboard allows the operator to set all automatic skip parameters, such as movement speed, missions, etc. The position of the Master and Lem skip is controlled by means of an encoder, whilst the data transmission takes place by means of photocells.

Standard:

This trolley is equipped with a high possibility of customization for the needs of the customer and companies, it is equipped with double drive shaft for heavy use and splitting forks in the same structure

Optional:

As for the configuration of the production plant, the automatic transfer trolley is freely configurable

Plus: 30 years warranty

Technical features

Download technical sheet Request information

Number of floors Single table / Double table

from 10 to 20 / from 10 to 14

Net weight Single board / Double board

7.000 Kg / 9.000 Kg

Max speed Master Single table / Double table

120 Mt/1 / 100 Mt/1’

Max speed Lem Single table / Double table

60 Mt/1’ /60 Mt/1’